Simple conversion needed. Will pay for doing it.

[topkote]

Good morning Folks,
Its one of those days. I need someone to make me up the following CUT FILES FOR the following house Letters with Numbers.

I need 2 Letter C as in Casey letters in the Bold Time New Roaman Font that are approximately 24".
One needs the number 96 the other 354

The Third Letter needs to be G as in George. Same Bold Timers New Roman Font Approximately 24".
This letter G need the number 380 .

I have attached a copy of what I'd like. Notice that the G 380 needs to be better aligned.

Let me know how much you want to do them. I am too frustrated to work on them any more today and need to get them done for my friend.

Thanks Mike

Letter_C_with_354_Letters_SVG.svg-text37166-239.png

Letter G with 380 Letters SVG.svg

Letter C with 96 Letters SVG.svg

[TJS]

Not sure what the ask is here. You have created the files it looks like already. Are you asking to have them cut out.

[plasmanewbie]

I'm with TJS in guessing you need them cut. Where are you located? What thickness and type of material?

[topkote]

Sorry for the confusion. I just need the files converted to DXF so I can cut them out.

[plasmanewbie]

Here are the C's, and the G hope it helps. May need some tweaks to get exactly what you need but it's close and in dxf format.

C96.dxf

C354.dxf

G380.dxf

[TJS]

Topkote,
Are you using sheetcam. I use sheetcam/CommandCNC and all I used are SVGs. Created in Inkscape.

[adbuch]

Sorry for the confusion. I just need the files converted to DXF so I can cut them out.

You could simply open them with Inkscape and then save as dxf.
David

[Joe Jones]

Unless you need to match existing signs, why not ass some flair to them?

Joe

C AND G ADDRESS 5 SIGNS.jpg

C AND G ADDRESS SIGNS.dxf

C AND G ADDRESS SIGNS 5.dxf

C AND G ADDRESS SIGNS 4.dxf

C AND G ADDRESS SIGNS 3.dxf

C AND G ADDRESS SIGNS 2.dxf

[plasmanewbie]

Unless you need to match existing signs, why not ass some flair to them?
Joe

Hey Joe, you assed a lot of flair to those! Seriously though, they look great

[Joe Jones]

I like the lower right design the best

Joe


.