Side Grate Cover for a Samson 510?

[CCR Custom Metals]

I have seen someone in the past with a design for the edges of the table, over the ends of the grates to help seal the table up to increase vacuum. Does anyone have a file for that?

Inked245267381_256762159610757_5629620073248589007_n_LI.jpg

[adbuch]

I have no cut files or drawings, but this is what you are looking for. I made cardboard template, transferred to 22 ga. steel, and used shear and brake to fabricate them. Very easy to do.
David



More photos here:
https://photos.app.goo.gl/h8LHufi6frttfGNQA

20170719_215934.jpg

[adbuch]

Do you happen to have this in closed paths and not cut paths?

pumpkin.dxf

pumpkin.dxf image.jpg

[adbuch]

I have seen someone in the past with a design for the edges of the table, over the ends of the grates to help seal the table up to increase vacuum. Does anyone have a file for that?

Inked245267381_256762159610757_5629620073248589007_n_LI.jpg

Did you ever get these cut and installed? If so, we'd love to see how they turned out.
David

[Joe Jones]

In my travels, I have seen variations on this theme...

Joe

EDGE COVERS.jpg