Hello,
I have searched high and low to find a drag tip to use with my Harbor Freight Titanium 45A (#56255) plasma cutter. I would greatly appreciate it if anyone can share a product with me.
Here's the plasma cutter I have --> https://www.harborfreight.com/45a-plasm ... 56255.html
Thanks in advance!
Where to find DRAG TIPS for Harbor Freight Titanium 45A Plasma Cutter
-
- 1/2 Star Member
- Posts: 4
- Joined: Fri Dec 11, 2020 11:28 am
-
- 3 Star Member
- Posts: 404
- Joined: Tue Sep 30, 2008 3:40 pm
Re: Where to find DRAG TIPS for Harbor Freight Titanium 45A Plasma Cutter
Harbor Freight has the consumables, don't a drag specific tip but that's what the standoff is for show on the end of the torch.
-
- 1/2 Star Member
- Posts: 4
- Joined: Fri Dec 11, 2020 11:28 am
Re: Where to find DRAG TIPS for Harbor Freight Titanium 45A Plasma Cutter
Thanks for your reply. Yeah, I'm aware of their consumables—unfortunately, no drag tips. I want a drag tip because I don't like using the standoff.cuttinparts wrote: ↑Fri Dec 11, 2020 11:56 am Harbor Freight has the consumables, don't a drag specific tip but that's what the standoff is for show on the end of the torch.
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 2020
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Where to find DRAG TIPS for Harbor Freight Titanium 45A Plasma Cutter
Not sure about the Titanium, but the older models had a Trifimate (sp) torch. Maybe you can get drag consumables for one of those.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 1/2 Star Member
- Posts: 4
- Joined: Fri Dec 11, 2020 11:28 am
Re: Where to find DRAG TIPS for Harbor Freight Titanium 45A Plasma Cutter
Anybody have a link for where I can buy?
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8131
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Where to find DRAG TIPS for Harbor Freight Titanium 45A Plasma Cutter
this may help if it is a Trifiate torch.
https://shop.trafimet.com/en/contact.html
https://shop.trafimet.com/en/products/PLASMA/
https://www.weldingstop.com/For-Trafimet-c1456.html
https://shop.trafimet.com/en/contact.html
https://shop.trafimet.com/en/products/PLASMA/
https://www.weldingstop.com/For-Trafimet-c1456.html
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1/2 Star Member
- Posts: 4
- Joined: Fri Dec 11, 2020 11:28 am
Re: Where to find DRAG TIPS for Harbor Freight Titanium 45A Plasma Cutter
Thank you!acourtjester wrote: ↑Sun Dec 13, 2020 9:35 am this may help if it is a Trifiate torch.
https://shop.trafimet.com/en/contact.html
https://shop.trafimet.com/en/products/PLASMA/
https://www.weldingstop.com/For-Trafimet-c1456.html
-
- 3.5 Star Elite Contributing Member
- Posts: 763
- Joined: Wed Nov 26, 2014 1:22 pm
- Location: Fairfield, CT.
- Contact:
Re: Where to find DRAG TIPS for Harbor Freight Titanium 45A Plasma Cutter
Those look to be the same torch as HTP. I get my consumables for my HTP plasma cutter actually at Harbor Freight. You can also try HTP site. USAweld dot com.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8131
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Where to find DRAG TIPS for Harbor Freight Titanium 45A Plasma Cutter
good old Google
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1 Star Member
- Posts: 10
- Joined: Sun Dec 29, 2019 9:23 am
Re: Where to find DRAG TIPS for Harbor Freight Titanium 45A Plasma Cutter
The best thing to do if you have a Titanium plasma cutter is change the torch out to a PT/IPT 60 torch then you can get all kinds of consumables for it.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here