need help putting hatching in a sport logo to engrave
-
- 1/2 Star Member
- Posts: 2
- Joined: Sat Apr 25, 2020 12:27 pm
need help putting hatching in a sport logo to engrave
I bought a file that has a blues note in it wanted to put hatching in it to engrave the blues name and stl but its not going well I did not post due to rules been trying to use inkscape to do it in I also have bobcad/cam. Any help would be apricated. I have a easy scribe and a machine mounted engraver. the cnc is all home builded I can send file but don't want to break any rules but really need skill of hatching for other things to make hybrid signs
-
- 6 Star Elite Contributing Member
- Posts: 9856
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8131
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: need help putting hatching in a sport logo to engrave
here is a post about that and there are others too.
viewtopic.php?f=172&t=30116
and viewtopic.php?f=100&t=28607
mounting a diamond scribe on a table.
viewtopic.php?f=122&t=27403
viewtopic.php?f=172&t=30116
and viewtopic.php?f=100&t=28607
mounting a diamond scribe on a table.
viewtopic.php?f=122&t=27403
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT