Plate Marker Attachment
-
- 1.5 Star Member
- Posts: 42
- Joined: Sat May 04, 2019 9:30 pm
- Contact:
Plate Marker Attachment
So I've picked up what looks to be the first gen Torchmate brand Plate Marker. Im not entirely sure if it came with everything I need to setup but looks like most is all there, power cords, relay box however missing the 1/4 air manifold it looks. But im not sure what else is suppose to come with it for an install. Now the question is I am running a Torchmate 2 system with the Blue AVHC. But the platemarker did not come with any paper work on how to install it or anything and I am looking for a PDF or something to figure out how to set them up on my Torchmate 2 as well they way to see if I am missing any critical parts. Any help is appreciated. What is pictured is all I have.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Spaded Creatives LLC.
Lincoln Torchmate 2 4x8 Watertable
ShopBot 5x10 CNC Router
Miller XMT 304 welder
Miller Suitcase 12Rc
Miller 15a Mig gun
Eastwood Tig 200
Lincoln 140HD welder
Roland GX 24 vinyl cutter
Hyper smooth Powder coater
Lincoln Torchmate 2 4x8 Watertable
ShopBot 5x10 CNC Router
Miller XMT 304 welder
Miller Suitcase 12Rc
Miller 15a Mig gun
Eastwood Tig 200
Lincoln 140HD welder
Roland GX 24 vinyl cutter
Hyper smooth Powder coater
-
- 4.5 Star Elite Contributing Member
- Posts: 2168
- Joined: Fri Apr 17, 2009 11:48 am
Re: Plate Marker Attachment
Found some documentation and vids on the newer stuff as I am sure you have but nothing looks like what you have. Hopefully someone can help otherwise just dig in and figure it out as you go. Good luck