I've been making more and more signs and am tired of hand grinding then trying to grain them with belt sander.
Would a Supermax 19-38 Drum Sander work for this? Or anyone have any firsthand experience? Cannot afford or have space for a timesaver machine.
https://www.supermaxtools.com/products/ ... der-71938/
Supermax Drum Sander
-
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: Supermax Drum Sander
How much is that?
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
-
- 1.5 Star Member
- Posts: 31
- Joined: Wed Mar 05, 2014 8:08 pm
Re: Supermax Drum Sander
SUPMX-71938 19-38 Combo Brush/Drum Sander (Bench Top) $2,299.00
I found one used locally for $900
I found one used locally for $900
-
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: Supermax Drum Sander
Let us know how well it works
Aren’t the brushes $500 each?
Aren’t the brushes $500 each?
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
-
- 1.5 Star Member
- Posts: 31
- Joined: Wed Mar 05, 2014 8:08 pm
Re: Supermax Drum Sander
Went and tested a few pieces of metal through it and if there was any dross it would take multiple passes to get it off. Didn't have the balls the timesaver machines have to clean it in one pass so i passed on it.
-
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: Supermax Drum Sander
how many passes do you think it would have taken?
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
-
- 2 Star Member
- Posts: 95
- Joined: Tue Sep 22, 2015 4:23 am
Re: Supermax Drum Sander
If I may chime in. Don't they make a larger version, twin head 37" long with twin 5hp motors? Anyone see that before and or tried one to see how they go.
- Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: Supermax Drum Sander
I would like to know how this one would work. Its $1999.
https://bislagunatools.com/supmx-72550- ... -8QAvD_BwE
Anyone out there have experience with this type of drum sander for Metal?
https://bislagunatools.com/supmx-72550- ... -8QAvD_BwE
Anyone out there have experience with this type of drum sander for Metal?
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...