Planishing hammer
-
- 3 Star Elite Contributing Member
- Posts: 303
- Joined: Sat Jan 01, 2011 1:47 pm
- Location: Platteville, CO
Planishing hammer
Thinking about buying or building a planishing hammer. Does anyone have any advice what to buy, what not to buy, etc? I would like to keep cost in the $4,000 range or less. Thanks, Dave.
- Sampson Jones
- 3 Star Elite Contributing Member
- Posts: 331
- Joined: Mon Jul 25, 2011 9:30 pm
Re: Planishing hammer
Over your budget but this machine does planishing and a lot more . www.kuttawametalcraft.com
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
-
- 3 Star Elite Contributing Member
- Posts: 303
- Joined: Sat Jan 01, 2011 1:47 pm
- Location: Platteville, CO
Re: Planishing hammer
Thanks. I'll probably go with Jet, baleigh or there was another I saw on You Tube.Sampson Jones wrote: ↑Thu Jul 11, 2019 6:56 am Over your budget but this machine does planishing and a lot more . www.kuttawametalcraft.com