I am having an issue importing a DXF into Sheetcam. it is a simple file. When I upload the drawing the lower notch in the fins is missing. Any suggestions? I have attached the file and a picture of the screen. Thank you very much!
Drawing Import issue - Missing profiles, missing lines
-
- 1/2 Star Member
- Posts: 2
- Joined: Fri Apr 05, 2019 2:15 pm
-
- 2.5 Star Member
- Posts: 188
- Joined: Tue Mar 22, 2016 10:30 am
Re: Drawing Import issue
What cad package did you draw them with? The outlines are splines rather than lines and they appear to be triggering an obscure bug in SheetCam.
As a workaround load the drawing back into qcad, select everything then select Modify->explode. The drawing should now work.
As a workaround load the drawing back into qcad, select everything then select Modify->explode. The drawing should now work.
-
- 1/2 Star Member
- Posts: 2
- Joined: Fri Apr 05, 2019 2:15 pm
Re: Drawing Import issue
That did the trick! thank you very much!