Hi need a little help just got back into plasma cutting and iv forgotten how to adjust my torch hight between cuts so it does not hit any other piece what might of popped up I'm using sheetcam for post.
Thanks in advance.
How to Move Torch Up Between Cuts
-
- 1 Star Member
- Posts: 11
- Joined: Mon Nov 11, 2013 9:27 pm
- Location: March uk
- WyoGreen
- 4 Star Member
- Posts: 897
- Joined: Tue Mar 04, 2014 8:36 pm
- Location: Cheyenne, Wyoming
Re: Torch height when moving
In Sheetcam, go to Options/Job options, and find the Rapid Clearance box in the Material tab.
Steve
Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
-
- 1 Star Member
- Posts: 11
- Joined: Mon Nov 11, 2013 9:27 pm
- Location: March uk
Re: Torch height when moving
Thank you so much I was sure it was in post processor thanks again