Painting Engravings

Learn and share top coat finishing techniques, experiences, and product knowledge here. Paint, anodize, rubber coating, etc.
Post Reply
Trae Reed
1 Star Member
1 Star Member
Posts: 12
Joined: Tue Nov 27, 2018 8:00 pm

Painting Engravings

Post by Trae Reed »

What is everyone doing to paint engravings? I just started engraving and want to see what others are doing to make things pop. Thanks, Trae
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1688
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Painting Engravings

Post by tnbndr »

I typically paint over the piece, let the paint dry and then grind off all the paint leaving just paint in the deep engraving.
I also use machinists dye, but typically only come in red and blue.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
Trae Reed
1 Star Member
1 Star Member
Posts: 12
Joined: Tue Nov 27, 2018 8:00 pm

Re: Painting Engravings

Post by Trae Reed »

That's what I did and it turned out awesome, Thank you for the help!!
Post Reply

Return to “Paint & Other Top Coats”