Recommended part spacing vs thickness?

Share tips and tricks regarding cut cutting, material handling, metal finishing, marketing, or anything you find helpful.
Post Reply
AD80
1 Star Member
1 Star Member
Posts: 16
Joined: Fri Jul 14, 2017 4:12 pm

Recommended part spacing vs thickness?

Post by AD80 »

When nesting parts - Is there a rule of thumb with regard to part spacing and the thickness of material or amps used?

Thank you!
AD
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1688
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Recommended part spacing vs thickness?

Post by tnbndr »

1/4" has always worked for me.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Recommended part spacing vs thickness?

Post by motoguy »

2.5x kerf is a good rule of thumb, IMO.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
User avatar
RobinHillMachine
3 Star Member
3 Star Member
Posts: 309
Joined: Mon Sep 19, 2016 1:32 pm
Location: Pennsylvania
Contact:

Re: Recommended part spacing vs thickness?

Post by RobinHillMachine »

I have this file that you can burn and find out what your minimum spacing is.
https://robinhillmachine.com/epages/100 ... s/nodetest
Julie's the name, DXF is the game. http://robinhillmachine.com
Email DXF@robinhillmachine.com
AD80
1 Star Member
1 Star Member
Posts: 16
Joined: Fri Jul 14, 2017 4:12 pm

Re: Recommended part spacing vs thickness?

Post by AD80 »

Sorry for the late reply - thanks for the suggestions!
I'm learning 8-10mm part spacing seems to work well on material thickness upto 15mm, and anything thicker than that - 15mm part spacing.
I could probably get things nested closer messing around with lead ins/outs, but I'm not that advanced yet!
Post Reply

Return to “Tech Tips From Other Members”