Tape measure option Corel x7
-
- 1 Star Member
- Posts: 21
- Joined: Wed Nov 02, 2016 6:32 pm
Tape measure option Corel x7
Is there a way I can measure something in a drawing? Tks
- Team Tracker
- 2.5 Star Member
- Posts: 104
- Joined: Thu Nov 18, 2010 7:36 pm
Re: Tape measure option Corel x7
down on the left hand side in corel there is a measure tool Call "Parrallel Dimension Tool" you just have to click on one side of the object you want to measure and hold and drop to the other side it will have the measurement of it.
or if you and trying to figure out the over all size high light the complete object and in the upper left corner beside the xy it will tell you the size
hope this helps
Terrie
Team Tracker
or if you and trying to figure out the over all size high light the complete object and in the upper left corner beside the xy it will tell you the size
hope this helps
Terrie
Team Tracker
1-800-590-7804
-
- 1 Star Member
- Posts: 21
- Joined: Wed Nov 02, 2016 6:32 pm
Re: Tape measure option Corel x7
Tks, will try it out
- rons
- 2.5 Star Member
- Posts: 179
- Joined: Thu Jul 23, 2015 2:26 pm
- Location: Charlotte, NC
Re: Tape measure option Corel x7
If you have rulers set to show, click the top left corner and drag the ruler to your starting point then move the mouse to the other point look you want to measure back at the ruler you will see the mouse position not exact but great for quickness also zoom in for better accuracy.
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
-
- 1 Star Member
- Posts: 21
- Joined: Wed Nov 02, 2016 6:32 pm
Re: Tape measure option Corel x7
Yes guys, the icon where the parallels are can all be used for measuring. Even angles between too lines that instersect. I never actually used the parallels for nothing so didn't know it could do all this. Tks a lot