Source I like for flap discs
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Source I like for flap discs
I was reading another thread, and saw the PS user mention their flap wheel consumables at $8 each. I thought I would share the place I use, and am happy with.
http://www.grindtoolabrasives.com
I learned of them from their post on Pirate4x4.
http://www.pirate4x4.com/forum/tools-su ... -29-a.html
Using the discount code PIRATE (additional 10% discount) at checkout, the flap discs were something like $1.70 each when I last ordered. I have no affiliation with them, other than being a satisfied customer. When I saw the mention of $8 flap discs, I thought this info might help some folks.
http://www.grindtoolabrasives.com
I learned of them from their post on Pirate4x4.
http://www.pirate4x4.com/forum/tools-su ... -29-a.html
Using the discount code PIRATE (additional 10% discount) at checkout, the flap discs were something like $1.70 each when I last ordered. I have no affiliation with them, other than being a satisfied customer. When I saw the mention of $8 flap discs, I thought this info might help some folks.
Last edited by motoguy on Thu Jun 30, 2016 12:21 pm, edited 1 time in total.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8132
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Source I like for flap discs
Thanks Files away for future use.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 3 Star Elite Contributing Member
- Posts: 412
- Joined: Thu Jun 25, 2015 4:06 pm
- Contact:
Re: Source I like for flap discs
Wow... I thought I was getting a deal $5 each for the ones I have been using!motoguy wrote:I was reading another thread, and saw the PS user mention their flap wheel consumables at $8 each. I thought I would share the place I use, and am happy with.
http://www.grindtoolabrasives.com
I learned of them from their post on Pirate4x4.
http://www.pirate4x4.com/forum/tools-su ... -29-a.html
Using the discount code PIRATE at checkout, the flap discs were something like $1.70 each when I last ordered. I have no affiliation with them, other than being a satisfied customer. When I saw the mention of $8 flap discs, I thought this info might help some folks.
Thanks for sharing the information!
PlasmaCam DHC2
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
Hyperthem PM65
Edwards 25T Ironworker
Miller Mig, Tig, Stick & Portable
Why pierce it when you can punch it!
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Source I like for flap discs
I haven't generated generic enough files to share, so I do what I can to help!Bobcat320 wrote:Wow... I thought I was getting a deal $5 each for the ones I have been using!
Thanks for sharing the information!
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Source I like for flap discs
Even better pricing than I was getting through benchmark at around $2each when buying 50. Lets hope they hold up the same or better. Thanks for sharing
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1688
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Source I like for flap discs
I just ordered a couple of 7-1/4" steel cutting saw blades for $24. I'll see how they hold up, I've been buying them off ebay for around $45 so if they are any good that is a savings. Will order flap wheels when my stock runs low.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1688
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Source I like for flap discs
Just an FYI, I ordered two sawblades from this company and they shipped only one, packing slip says 2 and they charged my card for two.
Will not respond to emails or phone calls.
Will not respond to emails or phone calls.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- little blue choo
- 4 Star Member
- Posts: 1461
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Source I like for flap discs
I have been using benchmark flap disc for over a year and highly recommend them. They last much longer than a lot of the big name brands I was using and cost a lot less. The last ones I purchased cost around $1.75 each. I have included a link to their ebay store. Hope this helps some of you.
Rick
http://stores.ebay.com/B-Mark-Abrasives ... 7675.l2563
Rick
http://stores.ebay.com/B-Mark-Abrasives ... 7675.l2563
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Source I like for flap discs
Dennis, this is very disappointing to hear. I have always had excellent results with them, and they seem to have a very positive reputation on Pirate as well. That is why I went with him to begin with. Has this situation been resolved? I'm hoping it was just some sort of a misunderstanding or miscommunication.tnbndr wrote:Just an FYI, I ordered two sawblades from this company and they shipped only one, packing slip says 2 and they charged my card for two.
Will not respond to emails or phone calls.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1688
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Source I like for flap discs
I have sent 3 emails asking for a response or resolution with no answer. When I call I get an answering machine and leave a message and my number with no call back.Has this situation been resolved?
Guess I won't be doing business with them anymore and unfortunately I cannot recommend Grind Tool Abrasives , http://www.grindtoolabrasives.com/.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Source I like for flap discs
I've brought it up on his Pirate thread. Makes me feel like a boob, trying to be helpful and then something like this happens.
http://www.pirate4x4.com/forum/tools-su ... st37505658
http://www.pirate4x4.com/forum/tools-su ... st37505658
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Source I like for flap discs
Dennis,
Did you ever get this resolved with the missing blade?
Anyone else running into trouble with orders/stocking now two week later?
Did you ever get this resolved with the missing blade?
Anyone else running into trouble with orders/stocking now two week later?
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 828
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
Re: Source I like for flap discs
Tagged for flap discs. Thanks!
I think I'm the oldest 10 year old boy on the forum...
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1688
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Source I like for flap discs
No worries!!Makes me feel like a boob, trying to be helpful and then something like this happens.
Nope, never heard back and can't get anything resolved if you can't contact people. Just chalking it up as a bad experience.Dennis,
Did you ever get this resolved with the missing blade?
What could have been a good deal turned into one expensive saw blade.
I posted on the supplied link on Pirate also.
Cannot recommend http://www.grindtoolabrasives.com/
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Source I like for flap discs
So I placed an order and it went smoothly and my order shipped promptly.
I ordered a batch of 120 and 60 grit Type 29 flap discs. I haven't had a chance to do an A/B test of the durability, but I'll update the thread once I have a comparison.
I ordered a batch of 120 and 60 grit Type 29 flap discs. I haven't had a chance to do an A/B test of the durability, but I'll update the thread once I have a comparison.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG