The "JEEP" Fire Pit
-
- 1/2 Star Member
- Posts: 4
- Joined: Sun Jan 17, 2016 5:18 pm
- Location: Alberta, Canada
The "JEEP" Fire Pit
Hi everyone. I'm new to the page and saying hello. Amazing forum and I love all the shares. I was reading through the Jeep fire pit and saw some people were having trouble with tabs so I modeled it up in Solidworks and found some problems. I fixed them up for you all and would like to share them with you. Thanks for sharing everyone.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
The fear of death follows from the fear of life. A man who lives fully is prepared to die at any time. - Mark Twain
- larrycameron44
- 3.5 Star Member
- Posts: 578
- Joined: Sun Oct 31, 2010 4:12 pm
- Location: Auckland New Zealand
Re: The "JEEP" Fire Pit
Brilliant. Thank you very much.
Larry Cameron
New Zealand
Larry Cameron
New Zealand
-
- 2.5 Star Member
- Posts: 170
- Joined: Wed Nov 20, 2013 10:34 am
- Location: Louisiana
Re: The "JEEP" Fire Pit
Welcome - thanks for the Jeep fire pit clean up! I was just working on this - so you may have saved me some time.
-
- 2 Star Member
- Posts: 88
- Joined: Wed Aug 19, 2009 9:59 am
Re: The "JEEP" Fire Pit
thanks,
nice desing
nice desing
-
- 2 Star Member
- Posts: 88
- Joined: Sat Oct 12, 2013 7:46 pm
Re: The "JEEP" Fire Pit
Thanks for the share and the cleanup of the original file! Great job!
LDR Motionsystems 4x4 plasma
Hypertherm 45
Laser 4 X 4
Full woodshop
Hypertherm 45
Laser 4 X 4
Full woodshop
-
- 1 Star Member
- Posts: 16
- Joined: Tue Aug 04, 2015 10:55 am
Re: The "JEEP" Fire Pit
Very Nice!
-
- 1 Star Member
- Posts: 16
- Joined: Tue Aug 04, 2015 10:55 am
Re: The "JEEP" Fire Pit
What thickness did you draw this for?
-
- 1/2 Star Member
- Posts: 4
- Joined: Sun Jan 17, 2016 5:18 pm
- Location: Alberta, Canada
Re: The "JEEP" Fire Pit
Thank you for the replies. I kept the same thickness as the original and made the slots for 3/16" plate.
The fear of death follows from the fear of life. A man who lives fully is prepared to die at any time. - Mark Twain
- Sampson Jones
- 3 Star Elite Contributing Member
- Posts: 331
- Joined: Mon Jul 25, 2011 9:30 pm
Re: The "JEEP" Fire Pit
thanks !
My design , 4ft x 8 ft water table
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
CandCNC electronics
Hypertherm powermax 65
Command Lineux
Super z 2
Sheetcam
Inkscape and corel draw
-
- 1.5 Star Member
- Posts: 31
- Joined: Mon Feb 22, 2016 1:56 pm
Re: The "JEEP" Fire Pit
Thanks!
-
- 3 Star Member
- Posts: 311
- Joined: Fri Oct 31, 2014 8:50 am
- Location: East Tennessee
Re: The "JEEP" Fire Pit
cool Pit, thanks for sharing the file.
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: The "JEEP" Fire Pit
Very nice work. Thanks
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 2 Star Member
- Posts: 67
- Joined: Sun Mar 01, 2009 12:33 pm
Re: The "JEEP" Fire Pit
Nice work. Thanks
-
- 1 Star Member
- Posts: 21
- Joined: Thu Dec 17, 2015 6:58 pm
- Location: Eastern Iowa
Re: The "JEEP" Fire Pit
Very nice, thank you. I cut this for a stroke victim benefit coming up this weekend.
Mark
Tracker 4x8 Pro Table
Hypertherm Powermax 65
Corel X7
Tracker 4x8 Pro Table
Hypertherm Powermax 65
Corel X7
-
- 1 Star Member
- Posts: 12
- Joined: Wed Oct 07, 2015 7:59 pm
- Location: East Windsor, NJ
- Contact:
Re: The "JEEP" Fire Pit
I had a customer ask for one to match his custom Jurassic Park YJ, so I figured I'd share the YJ face for anyone interested
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by jvhchassisworks on Fri Apr 22, 2016 2:07 pm, edited 1 time in total.
Plasma Cam DHC2 4x4 Plasma Table
Hypertherm Powermax 65
Hypertherm Powermax 65
-
- 1 Star Member
- Posts: 12
- Joined: Wed Oct 07, 2015 7:59 pm
- Location: East Windsor, NJ
- Contact:
Re: The "JEEP" Fire Pit
I just overlaid a YJ face onto the original end piece and got rid of the rest to insure the tab locations and everything stayed correct..the finished product looks awesome
Plasma Cam DHC2 4x4 Plasma Table
Hypertherm Powermax 65
Hypertherm Powermax 65
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: The "JEEP" Fire Pit
Red Star, I cut one of these today, based off your drawings. I need to make a few adjustments (think I'll open the slots up a bit, and make the pin holes larger), but it cut/looks great. Thank you!
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: The "JEEP" Fire Pit
Any chance a Plasmacam user can convert this one to DXF? I personally prefer the square lights.jvhchassisworks wrote:I had a customer ask for one to match his custom Jurassic Park YJ, so I figured I'd share the YJ face for anyone interested
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
-
- 2.5 Star Member
- Posts: 178
- Joined: Sat Oct 23, 2010 5:22 pm
Re: The "JEEP" Fire Pit
thanks for the file
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: The "JEEP" Fire Pit
Thanks for the YJ in DXF!
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
-
- 1/2 Star Member
- Posts: 9
- Joined: Sun May 21, 2017 8:25 pm
Re: The "JEEP" Fire Pit
So I may have the original of this file< New to the site so excuse the obvious question. I have the version with 2 additional pieces of the file must be for a pit that is not elevated the jeep end has no feet i would leave those out i'm guessing? Also i am using the hypertherm powermax 85 would you recomend a certain kerf with on this? or offsetting? Thanks for the files i cant wait to cut it by the way.
-
- 1.5 Star Member
- Posts: 36
- Joined: Fri Dec 22, 2017 9:50 pm
Re: The "JEEP" Fire Pit
Thanks for the share
-
- 2 Star Member
- Posts: 93
- Joined: Wed Aug 25, 2021 12:22 am
Re: The "JEEP" Fire Pit
NICE CLEAN UP THANKS
-
- 1/2 Star Member
- Posts: 1
- Joined: Thu Mar 30, 2023 11:29 am
Re: The "JEEP" Fire Pit
thanks