I Need some help on how to override the Jog Mode with an Xbox 360 controller while keeping the triggers as a safety.
Also notice the RED tape flag on the Z motor, I find really helpful when trying to see if the Z is adjusting for THC
Thanks Ron
Override Jog Mode with Xbox 360 controller
- rons
- 2.5 Star Member
- Posts: 179
- Joined: Thu Jul 23, 2015 2:26 pm
- Location: Charlotte, NC
Override Jog Mode with Xbox 360 controller
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
- rons
- 2.5 Star Member
- Posts: 179
- Joined: Thu Jul 23, 2015 2:26 pm
- Location: Charlotte, NC
Re: Override Jog Mode with Xbox 360 controller
Any ideas
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
- East German
- 4 Star Elite Contributing Member
- Posts: 591
- Joined: Sat Jan 05, 2013 8:21 am
- Location: Stapelburg Germany
Re: Override Jog Mode with Xbox 360 controller
Hallo Ron
I Use Keygrabber with a easy wireless Gamepad fore 10 Euro.
Works fine.
I had difficulties with the XBox controller
Regards Peter
I Use Keygrabber with a easy wireless Gamepad fore 10 Euro.
Works fine.
I had difficulties with the XBox controller
Regards Peter
- Attachments
-
- Vakoss.jpg (18.17 KiB) Viewed 944 times
- Vakoss.jpg (18.17 KiB) Viewed 944 times
Sorry for my language! The last English class was in 1982.
Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch
- rons
- 2.5 Star Member
- Posts: 179
- Joined: Thu Jul 23, 2015 2:26 pm
- Location: Charlotte, NC
Re: Override Jog Mode with Xbox 360 controller
The Xbox controller works great, I want to be able to use the safety and be able to override the current set jog speed when rapid moving the XYZ
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
- _Ogre
- 3.5 Star Member
- Posts: 529
- Joined: Sun Sep 15, 2013 4:26 pm
- Location: Motown
Re: Override Jog Mode with Xbox 360 controller
i use the xbox controller and yes it works great
not sure why you want the triggers set up as safety switches, i would eliminate that setup
we use the triggers for fast jog and laser x-hairs
buttons setup for cycle start/stop and zero all axis's
we also use the controller for all jogging, cycling and zeroing on the rotary head
for this we have the right trigger set up for coolant
not sure why you want the triggers set up as safety switches, i would eliminate that setup
we use the triggers for fast jog and laser x-hairs
buttons setup for cycle start/stop and zero all axis's
we also use the controller for all jogging, cycling and zeroing on the rotary head
for this we have the right trigger set up for coolant
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
- rons
- 2.5 Star Member
- Posts: 179
- Joined: Thu Jul 23, 2015 2:26 pm
- Location: Charlotte, NC
Re: Override Jog Mode with Xbox 360 controller
Thank you for your reply, I just kinda like the option of a safety to prevent torch fire or movement while handling the controller, but also wanta go fast, I cant find a way around it any other ideas?
Who's plugin are you using?
Ron
Who's plugin are you using?
Ron
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,