AVC problem on my Tracker
-
- 1 Star Member
- Posts: 18
- Joined: Wed Jun 24, 2009 5:29 pm
AVC problem on my Tracker
I am having an AVC problem on my tracker after I had to reload my computer after a harddrive crash. the AVC is jumping like a vibrating motion,when I turn off the AVC it smooths out. Im pretty sure it's in the software because it was working fine before I changed the hard drive. any ideas?
-
- 1 Star Member
- Posts: 18
- Joined: Wed Jun 24, 2009 5:29 pm
Re: AVC problem on my Tracker
Nobody has a clue? Huh.....
-
- 1.5 Star Member
- Posts: 37
- Joined: Fri Apr 17, 2009 11:53 am
Re: AVC problem on my Tracker
I saw your post, I wish i could help you out but I have no clue what the problem might be.
I'm responding because I was thinking about buying a new machine and Tracker was one that I was serious about. Tracker systems come with a factory installed computer...are they not able to help you out? Have you had a lot of problems with them not helping you out with tech support problems? I always heard their support was good?!
Hope you get this solved, try sending a PM to a member named "leatherhands"...he seems to have some experience with the Tracker systems.
fab-man
I'm responding because I was thinking about buying a new machine and Tracker was one that I was serious about. Tracker systems come with a factory installed computer...are they not able to help you out? Have you had a lot of problems with them not helping you out with tech support problems? I always heard their support was good?!
Hope you get this solved, try sending a PM to a member named "leatherhands"...he seems to have some experience with the Tracker systems.
fab-man
-
- 1/2 Star Member
- Posts: 8
- Joined: Sun Jul 19, 2009 3:49 pm
- Location: Tempe,az
- Contact:
Re: AVC problem on my Tracker
What happen if you try to un install the software and then re install it?
-
- 1 Star Member
- Posts: 18
- Joined: Wed Jun 24, 2009 5:29 pm
Re: AVC problem on my Tracker
I use Trackers tech alot and they have always been very helpful,they have fantastic tech support but since justin told me to sign up here on this forum I thought I would give you all a shot at it.fab-man wrote:I saw your post, I wish i could help you out but I have no clue what the problem might be.
I'm responding because I was thinking about buying a new machine and Tracker was one that I was serious about. Tracker systems come with a factory installed computer...are they not able to help you out? Have you had a lot of problems with them not helping you out with tech support problems? I always heard their support was good?!
Hope you get this solved, try sending a PM to a member named "leatherhands"...he seems to have some experience with the Tracker systems.
fab-man
I am going to try and reload the cut software again today and see if that clears it up. Thanks guys for the input.
-
- 1 Star Member
- Posts: 18
- Joined: Wed Jun 24, 2009 5:29 pm
Re: AVC problem on my Tracker
didn't get to it yet,I am in the middle a building a rollcage right now and have not needed it yet. maybe today sometime???leatherhands wrote:Got er fixed yet?
Leatherhands
-
- 1 Star Member
- Posts: 18
- Joined: Wed Jun 24, 2009 5:29 pm
Re: AVC problem on my Tracker
update:
I did reinstall the software and it did not help,I adjusted the sensitivity from 1 to 8 and it has helped but I do not think this is the cure.
I did reinstall the software and it did not help,I adjusted the sensitivity from 1 to 8 and it has helped but I do not think this is the cure.
-
- 2 Star Elite Contributing Member
- Posts: 65
- Joined: Thu Jun 25, 2009 7:48 am
Re: AVC problem on my Tracker
Hey ce ofroad
I have had my tracker for 3 years now thats a new problem to me but if you want to call me we can sit in front of our computers and make sure all are settings are the same. I am always looking to learn more .
Jim (murals in metal)
I have had my tracker for 3 years now thats a new problem to me but if you want to call me we can sit in front of our computers and make sure all are settings are the same. I am always looking to learn more .
Jim (murals in metal)
-
- 1.5 Star Member
- Posts: 48
- Joined: Wed Jul 29, 2009 11:49 am
- Location: Alberta Canada
Re: AVC problem on my Tracker
i have had a tracker for only ten months now and it has been great. tech support is awesome. i always talk to reid with any problems design or mechanical and he gets things back up and running right away, even on a long weekend! maybe try talking to him.
-
- 1 Star Member
- Posts: 18
- Joined: Wed Jun 24, 2009 5:29 pm
Re: AVC problem on my Tracker
Nope,not right anyway. I reloaded the software no change,i changed my AVC sensitivity from 1 to 8 and it slowed it down enough that It cuts fine that way and sometimes it don't do it at all.