I have built my own 4'x4" table using CandCNC BladeRunner Dragon Cut 620-4 EtherCut + DTHCIV.
Still in the teething stages but decided to play with the path rules in Sheetcam and I have run into a problem. There are no code options to insert?
Screen shot:
Using CandCNC post
DTHC-HYT-TAP_SoftPierce+Marker-rev11J.scpost
Any ideas?
No Code Option in Path Rules
-
- 1.5 Star Member
- Posts: 37
- Joined: Fri Oct 16, 2015 2:47 pm
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 8134
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: No Code Option in Path Rules
Your looking in the wrong place they are under Tools then cutting rules. name it what you want then
click on add rule then a menu will come up for you to create the rule you want.
click on add rule then a menu will come up for you to create the rule you want.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1.5 Star Member
- Posts: 37
- Joined: Fri Oct 16, 2015 2:47 pm
Re: No Code Option in Path Rules
Thanks for the help acourtjester. I tried to create a cutting rule under tools as you suggested but still do not have any options under start or end codes.
Also tired in the jet cutting operation window and have the same problem.
Also tired in the jet cutting operation window and have the same problem.
- WyoGreen
- 4 Star Member
- Posts: 897
- Joined: Tue Mar 04, 2014 8:36 pm
- Location: Cheyenne, Wyoming
Re: No Code Option in Path Rules
Eric, those start and end codes are normally listed at the end of the tool table
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
- SeanP
- 4 Star Member
- Posts: 951
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: No Code Option in Path Rules
To see options in that drop down box you need to create a 'code snippet'
Mine is the parallel port version and I'm not sure if the code is different but I use:
M10P1 (torch off)
Mine is the parallel port version and I'm not sure if the code is different but I use:
M10P1 (torch off)
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 1.5 Star Member
- Posts: 37
- Joined: Fri Oct 16, 2015 2:47 pm
Re: No Code Option in Path Rules
Thanks guys! Didn't know there was suppose to be a list at the bottom of my tooltable for them.
Just tried making a "code snippet" and it solved my problem. Back in business
Just tried making a "code snippet" and it solved my problem. Back in business